TANK AND SILO HEATING CABLES

Self Limiting Parallel Heating Tape PSB - 65 °C - 80 °C Cable

A temperature-dependant resistive element between two parallel copper conductors regulates and limits the heat output of the heating tape according to the ambient temperature. If the ambient temperature rises, the power output of the heating tape is reduced. This self-limiting property prevents overheating even when the tapes are crossed. A temperature limiter is not necessary (also not in hazardous areas). Thanks to the parallel design the heating tape can be cut and installed to any required length. The self-limiting heating tape is available with different power outputs and protective jackets. The protective outer jacket of either fluoropolymer or polyolefin protects the copper braiding from corrosion and chemical impact. Two  jackets under the protective braiding provide electrical insulation. The inner one of the two jackets is thermally fused to the heating element (bonded jacket). The heating system must be designed to ensure that the maximum operating temperature of 65 °C will notbe exceeded when it is energized. When it is switched off, the heating tape can be exposed to a temperature of 85 °C, not more than 1,000 hours cumulated.

Application Areas:

• Protection of liquid and gas pipelines from freezing in the chemical, petrochemical, food, and pharmaceutical industries.
• Temperature control of pipeline systems in production processes.
• Heating of pipelines in hazardous areas (ATEX-certified zones).
• Ensuring fluidity in crude oil and natural gas pipelines.
• Preventing fire suppression pipes from freezing in cold weather conditions.
• Maintaining temperature in water supply lines and storage tanks.
• Preventing freezing of liquids inside chemical and food storage tanks.
• Protection of building and facility pipelines in cold weather conditions.

Self Limiting Parallel Heating Tape MSB - 110 °C - 130 °C Kablo

Self limiting parallel heating tape MSB medium temperature — a temperature-dependent resistive element between two parallel copper conductors regulates and limits the heat output of the heating tape. This output regulation is carried out automatically along the entire length of the heating tape according to the prevailing ambient temperature. If the ambient temperature rises, the power output of the tape is reduced. Thanks to the parallel design, the heating tape can be cut to any required length. This feature considerably simplifies project planning and installation. The heating tape is cut and terminated directly on the construction site according to the circumstances. If the tape is damaged, it is not necessary to replace the whole tape. BARTEC MSB is available with different power outputs. The heating system must be designed to ensure that the maximum operating temperature of +110 °C will not be exceeded when it is energized. When it is switched off, the heating tape can be exposed to a temperature of 130 °C, not more than 1,000 hours cumulated.

• Can be cut to length at random thanks to its parallel current supply
• Resistant to chemical influences thanks to its protective TPC protective jacket
• Simple installation thanks to its high flexibility

Areas of Application

The MSB heating tape is suitable for electric trace heating in the industrial area and can be exposed to a temperature of up to 130 °C (switched off). With the halogen-free protective jacket, the heating tape is resistant to oil, greases, and most chemicals. For questions regarding the chemical resistance, please contact your BARTEC sales representative.

Self Limiting Parallel Heating Tape HSB - 120 °C - 200 °C Cable

Self limiting parelel heating tape HSB+ high temperature a temperature-dependant resistive element between two parallel copper conductors regulates and limits the power output of the heating tape. This output regulation is carried out automatically along the entire length of the heating tape according to the prevailing ambient temperature. If the ambient temperature rises, the power output of the tape is reduced. This self-limiting property prevents overheating even when the tapes are crossed. Thanks to the parallel design the heating tape can be cut to any required length. This feature considerably simplifies project planning and installation. The heating tape is cut and terminated directly on the construction site according to the circumstances. The heating system must be designed to ensure that the maximum operating temperature of +120 °C will not be exceeded when it is energized. When switched off, the heating tape can be exposed to a temperature of 200 °C for a short time, not more than 1,000 hours cumulated.

• Can be cut to length at random thanks to its parallel current supply
• Corrosion-proof and resistant to chemical attack thanks to its protective outer jacket of fluoropolymer
• Simple installation thanks favourable dimensions

Areas Of Application

The HSB heating tape is suitable for frost protecting in industrial areas. The level of its maximum possible heating output allows the heating tape to be used for maintaining high process temperatures.

Self limiting parallel heating tape HTSB - 220 °C - 250 °C Cable

Self limiting parelel heating tape HTSB high temperature a temperature-dependent resistive element between the parallel copper conductors regulates and limits the power output of the heating tape. This output regulation is carried out automatically at every point of the heating tape depending on the prevailing ambient temperature. If the ambient temperature increases, the power output is reduced. The parallel design allows the heating tape to be cut to any length. This simplifies planning and installation. The heating tape is cut directly on the construction site according the local circumstances. The heating system must be designed to ensure that the maximum operating temperature of +250 °C will not be exceeded when it is energized. When switched off, the heating tape may be exposed to a temperature of 250 °C for a short time, not more than 1,000 hours cumulated.

• Steam purging possible
• Wide operating temperature range
• Can be used in explosive atmospheres without temperature limiter
• Simple installation thanks to its high flexibility
• Outer protective fluoropolymer jacket ensures resistance to corrosion and chemical influences

Application Areas:

• Protection of pipelines and tanks carrying chemical substances from freezing.
• Temperature control in process lines working with corrosive and aggressive chemicals.
• Heating of crude oil and natural gas pipelines to ensure fluidity.
• Protection of high-temperature-required pipelines in refineries and petroleum processing plants.
• Safe temperature control in explosive atmospheres (Ex-proof zones).
• Safe use without the need for a temperature limiter.

Applications

The HTSB heating tape is the right solution for frost protection or temperature maintenance in pipelines or vessels in the industrial area. It is particularly suitable for applications with high ambient temperatures or aggressive chemicals.

Self-limiting parallel heating tape PSBL - 65°C - 85°C heating cable 

• Can be cut to any length due to the parallel current supply
• Tinned copper braiding for electrical and mechanical protection
• Easy installation due to high level of flexibility

Around two parallel positioned copper wires with a cross-section of 1 mm² an irradiated electrically conducting polymer is extruded. This electrically conducting matrix responds to changes of the ambient temperature with an increase or decrease of the heating output. A flame-retardant, UV-resistant jacket protects the braiding against humidity and offers additional protection against mechanical stress. The heating system must be designed to ensure that the maximum operating temperature of 65 °C will not be exceeded when it is energized. When it is switched off, the heating tape can be exposed to a temperature of 85 °C, not more than 1,000 hours cumulated.

Areas of application

The PSBL heating tape is suitable for electric trace heating for frost protection of pipelines and vessels. While the polyolefin protective jacket is used where there are aqueous, inorganic chemicals, the fluoropolymer protective jacket is suitable for organic chemicals. For questions regarding the chemical resistance please contact your BARTEC sales representative.

Self-Regulating Heating Cable – MSB Series | +110 °C Continuous Operating Temperature – +130 °C Exposure Temperature (De-energized)

The BARTEC MSB series self-regulating heating cable is ATEX and IECEx certified, designed for reliable use in industrial applications. It features a flexible structure, can be cut to the required length on-site, and is resistant to chemicals thanks to its fluoropolymer outer jacket. A temperature-dependent resistive heating element automatically adjusts the output based on ambient conditions, preventing overheating without the need for an external temperature limiter—even in hazardous areas.

Areas of Application

• Freeze protection of liquid and gas pipelines in chemical, petrochemical, food, and pharmaceutical industries

• Temperature maintenance for piping systems in process applications

• Heating of pipelines in hazardous areas (ATEX-certified zones)

• Ensuring flow in crude oil and natural gas lines

• Freeze protection for fire suppression systems under cold conditions

• Temperature maintenance in water supply lines and storage tanks

• Preventing freezing of liquids in chemical and food storage tanks

• Protection of facility and building piping systems in cold climates

PSB System PLEXO TCS – The Plug-İn Connection System

Features:

• Cross-section of connection cable up to 4 mm2
• Operating temperature range from -60 °C to +180 °C
• Integrated strain relief; high electrical and mechanical safety
• Quick and easy installation, with standard tools
• System approved with BARTEC self-limiting heating tapes

Explosion Protection:
Ex protection type

• PLEXO TCS with heating band
• II 2G Ex e IIC T5, T6Gb
• II 2D Ex tb IIIC T95 °C, T80 °C Db

Certification

• PLEXO TCS with heating band
• BVS 13 ATEX E 040
• IECEx BVS 13.0048X
• TC RU C-DE.ГБ06.B.00230

PSB System

• KEMA 08 ATEX 0111
• IECEx KEM 09.0084X
• TC RU C-DE.ГБ06.B.00230

Application:

• BARTEC Self-Limiting Heating Tape Connections
• Industrial Heating Systems Connections
• Heating Systems Connections in Explosive Atmospheres
• Hazardous Area Heating Tape Connections
• Heating Systems in Chemical Plants
• Heating Systems in Petrochemical Plants
• Heating Systems on Oil and Gas Platforms
• Heating Systems in Refineries

PSB as Limiting Heating Tape

Features:

• Direct entry of a heating tape into the junction box
• Connection and termination in one set
• Space-saving and economic solution
• Easy design and assembling with silicone cold applied technology

Explosion protection:
Ex protection type

• II 2G Ex e IIC T5, T6Gb
• II 2D Ex tb IIIC T95 °C, T80 °C Db

Certification System

• KEMA 08 ATEX 0111
• IECEx KEM 09.0084X
• TC RU C-DE.ГБ06.B.00230
• CSA 1862457*

Application:

• Heating Systems in Explosive Atmospheres
• Heating Applications in Hazardous Areas
• Heating Systems in Chemical Plants
• Heating Systems in Petrochemical Plants
• Heating Systems on Oil and Gas Platforms
• Heating Systems in Refineries
• Heating Systems in Hazardous Material Warehouses

PSB System Junction Box

Features:

• Wide temperature range
• Can be combined with connection technology PLEXO, heat shrink and cold-applied technology
• Flame-retardant
• Impact-resistant
• System approval

Explosion protection:
Ex protection type

• II 2G Ex e IIC T5, T6Gb
• II 2D Ex tb IIIC T95 °C, T80 °C Db

Certification System

• KEMA 08 ATEX 0111
• IECEx KEM 09.0084X
• TC RU C-DE.ГБ06.B.00230
• CSA 1862457*

Application:

• Industrial Heating Systems Connections
• Self-Limiting Heating Tape Connections
• Heat Shrink Connections
• Cold Application Technology Connections
• Heating Systems Connections in Explosive Atmospheres
• Process Heating Applications Connections
• Freeze Protection Systems Connections
• Pipeline Heating Systems Connections