DPC Front Standard Temperature Control Device
Ex Proof Heat Tracing Equipment - DPC Front Standard Temperature Control Device
Basic control device that can be used in the factory setting as ON/OFF control device with two relay outputs for regulation and alarm signalling for normal applications. The Easy Start-up function makes this extremely user-friendly.
DPC Front Standard Temperature Control Device
- Pre-defined parameters for two-position control
- Can also be used as PID control devices
- Easy Setup
Basic control device that can be used in the factory setting as ON/OFF control device with two relay outputs for regulation and alarm signalling for normal applications. Due to the factory basic setting only the setpoint and the alarm value(s) need to be set. The Easy Start-up function makes this extremely user-friendly. As an alternative, the same device can also be used as a control device with PID control characteristics and an external semi-conductor relay.
Application Areas:
- Industrial furnaces and dryers
- Plastic processing machines (extruders, injection machines)
- Food processing equipment
- Chemical processes
- Laboratory equipment
- Power plants
- HVAC systems
- Extruder Heating
- Hot press applications
- Heat treatment plants
- Packaging machines
- Cooling systems
- Ceramic kilns
- Incubators
- Medical equipment
- Simple heating and cooling applications
DPC Front Standard Temperature Control Device
| TECHNICAL DATA | |
| Control characteristics | ON/OFF or PID |
| Sensor input | Pt100, mV standard signals, thermocouple J,K,S |
| Input impedance | at mV: 1 MΩ |
| Measuring ranges | depending on the sensor version |
|
Measuring accuracy in resistance thermometers in thermocouples in standard signals |
±0.5 % of the actual value or ±1 °C; the higher value applies ±1 digit ±0.5 % of actual value or ±1 °C; the higher value applies ±1 digit (see also reference junction accuracy) (±0.5 % of actual value ) ±1 digit |
| Accuracy of the reference junction in thermocouple measurements | 0.04 °C for each °C operating temperature of the control device (after 20 min. operating time of the control device) |
| Sampling frequency at the sensor input | 7.5 Hz |
| Output 1 | Logic output for SSR control (DC 11 V/20 mA) |
| Output 2 | Relay output 1 normally open contact (8 A - AC 1, 250 V) |
| Output 3 | Relay output 1 normally open contact (5 A - AC 1, 250 V) |
| Electrical service life of the relay outputs | at least 100.000 switching cycles |
| Protection class | II |
| Power consumption |
max. 5 VA (depending on connection of outputs) |
| Weight | 0.2 kg |
DPC Front Standard Temperature Control Device
- Pre-defined parameters for two-position control
- Can also be used as PID control devices
- Easy Setup
Basic control device that can be used in the factory setting as ON/OFF control device with two relay outputs for regulation and alarm signalling for normal applications. Due to the factory basic setting only the setpoint and the alarm value(s) need to be set. The Easy Start-up function makes this extremely user-friendly. As an alternative, the same device can also be used as a control device with PID control characteristics and an external semi-conductor relay.
Application Areas:
- Industrial furnaces and dryers
- Plastic processing machines (extruders, injection machines)
- Food processing equipment
- Chemical processes
- Laboratory equipment
- Power plants
- HVAC systems
- Extruder Heating
- Hot press applications
- Heat treatment plants
- Packaging machines
- Cooling systems
- Ceramic kilns
- Incubators
- Medical equipment
- Simple heating and cooling applications
